solid state cooling is achieved via electric field induced strain

Cool stuff: the diagram on the left shows how the temperature of the caloric material was measured. The plot in the centre shows the temperature change in the sample when exposed to a magnetic field. The plot on the right shows the change in temperature when the sample is strained. (Courtesy: Peng Wu et al/Acta Materialia 237 118154)

Researchers in China have shown that applying strain to a composite material using an electric field induces a large and reversible caloric effect. This novel way of enhancing the caloric effect without a magnetic field could open new avenues of solid-state cooling and lead to more energy efficient and lighter refrigerators.

The International Institute of Refrigeration estimates that 20% of all electricity used globally is expended on vapour-compression refrigeration – which is the technology used in conventional refrigerators and air conditioners. What is more, the refrigerants used in these systems are powerful greenhouse gases that contribute significantly to global warming. As a result, scientists are trying to develop more environmentally friendly refrigeration systems.

Cooling systems can also be made from completely solid-state systems, but these cannot currently compete with vapour compression for most mainstream applications. Today, most commercial solid-state cooling systems use the Peltier effect, which is a thermoelectric process that suffers from high cost and low efficiency.

External fields

Solid-state cooling systems based on caloric materials offer both high refrigeration efficiency and zero greenhouse emissions and are emerging as promising candidates to replace vapour compression technology. These systems employ a solid material as a refrigerant, which when subjected to an external field (electric, magnetic, strain or pressure) undergoes a change in temperature – a phenomenon called the caloric effect.

So far, most research into solid-state caloric cooling systems have focussed on magnetic refrigerants. However, practical refrigerants must exhibit a significant caloric effect near room temperature, and such materials are generally hard to find. One potential material is Mn3SnC, which displays a significant caloric effect when exposed to magnetic fields greater than 2 T. But employing such a high magnetic field necessitates the use of expensive and bulky magnets, which is not practical.

Now, Peng Wu and colleagues at ShanghaiTech University, Shanghai Institute of Microsystem and Information Technology, University of Chinese Academy of Sciences and Beijing Jiaotong University, have eliminated the need for magnets by combining a Mn3SnC layer with a piezoelectric layer of lead zirconate titanate (PZT).

Doing away with the magnets

In a series of experiments described in Acta Materialia, the team observed a reversible caloric effect without the need for a magnetic field. The adiabatic temperature change achieved was around double that measured for Mn3SnC in the presence of a 3 T magnetic field.

The caloric effect was observed by applying an electric field to the material, which induces strain in the PZT via the reverse piezoelectric effect. The strain is transferred from the PZT layer to the Mn3SnC layer, which results in a change in magnetic ordering of the Mn3SnC. This causes a temperature drop of up to 0.57 K in the material. When the electric field is removed, the temperature increases by the same value.

Wu tells Physics World, that he got this idea from  microelectromechanical systems (MEMS), which often use piezoelectrical materials for actuation. According to Wu, using electric-field mediated strain could help eliminate the need for costly and large magnets, creating a more efficient and sustainable refrigeration system.

Challenging measurement

The caloric effect is measured either by estimating the adiabatic change in temperature or the isothermal entropy change. In both industry and research, temperature change, is the preferred method. While this is a straightforward experiment for pure bulk materials, it is extremely difficult to do for a device-based composite material that is subject to an electric field.

To make the measurement, Wu and colleagues used a system equipped with a thermocouple probe attached to the Mn3SnC surface in an adiabatic environment with precisely controlled magnetic field and temperature.

To assess the accuracy of their measurement system, the researchers carried out several magnetocaloric effect measurements in the temperature range of 275–290 K. They were able to monitor temperature changes down to 0.03 K, hence verifying the system’s high resolution temperature capacity.

Wu believes the team’s work is a breakthrough in measuring temperature change directly, given the challenge of making an adiabatic temperature measurement while applying a voltage to the PZT. He adds, “This approach of temperature measurement could be useful for other thermal electronic devices”. However, Wu stresses “the system is not completely adiabatic; it may cause heat loss, hence further improvement is necessary for any heat measurements”.

Interesting and unexplained

The team also observed some very interesting and unexpected phenomena during the temperature measurement. “No matter whether one applies a positive or negative electric field, the surface temperature of Mn3SnC always decreases”, Wu says. They also found that by applying a magnetic field to the composite, the surface temperature of Mn3SnC rises, whereas applying an electric field does the opposite and causes a reduction in the temperature. Wu says that the team does not yet understand these observations.

The researchers now aim to study the underlying physics behind the contrasting behaviour of Mn3SnC/PZT under magnetic and electric fields. To further improve the temperature measurement system, they are also trying to solve the problem of heat loss.

Keyword: Solid state cooling is achieved via electric field induced strain


Structural colours change as holographic images are stretched

Nobel-winning technique Light-sensitive polymer Chameleon like: researchers at MIT have created a way to create large-scale images that change colour when stretched. (Courtesy: Mathias Kolle/Benjamin Miller/Helen Liu) Building on a largely forgotten photography technique, researchers in the US have developed a photographic material that changes colour when stretched. Working ...

View more: Structural colours change as holographic images are stretched

Vortices appear in an electron fluid

Electrons behave like quantum waves The hydrodynamic regime Electrons flowing in vortices Top: Schematic experimental layout showing samples of Au (a) and WTe2 (b) together with the device used to measure current flow. Bottom: Normalized current densities measured experimentally in c) Au and d) WTe2 showing laminar and vortical ...

View more: Vortices appear in an electron fluid

Long-range semiconductor defects come into view

Triangular pits and trenches General technique for directly visualizing defects Schematic diagram of the method for directly visualizing defects in 2D semiconductors. (Courtesy: G Zhang) Directly visualizing structural defects in semiconductors on large scales is no easy task. The main microscopy techniques are limited to fields of view measuring ...

View more: Long-range semiconductor defects come into view

Radiation damage is spotted using calorimetry technique

Longer life: the new analysis technique could help extend the lives of some nuclear power plants. (Courtesy: iStock/ Material defects caused by radiation damage can be characterized by measuring the energy that the defects release when heated. That is the conclusion of researchers in the US and Finland, who ...

View more: Radiation damage is spotted using calorimetry technique

Octopus-inspired glove grabs underwater objects using LIDAR

Strong adhesive bond Glove with synthetic suckers and sensors Several gripping modes Gripping demonstration: researchers test the Octa-glove in the lab of Michael Bartlett. (Courtesy: Alex Parrish/Virginia Tech) Inspired by the way the skin on octopus arms works, researchers at Virginia Tech in the US have developed a new ...

View more: Octopus-inspired glove grabs underwater objects using LIDAR

Light restores charge to slippery surfaces

Photocontrol of a water droplet moving upward. (Courtesy: X Du) A super-slippery material that regenerates its surface charge when illuminated could pave the way for next-generation interfacial materials and microfluidics. The new material is a combination of a copolymer, tiny liquid metal particles and lubricant-trapping microstructures, and its developers ...

View more: Light restores charge to slippery surfaces

Excitonic insulators are created in moiré superlattices

Moiré superlattices Neutral bosons Layered approach: both teams created excitonic insulators by twisting the relative orientations of thin sheets in layered materials. (Courtesy: Shutterstock/Mopic) Excitonic insulators – an exotic type of matter with a ground state comprising bound electron–hole pairs – have been made by two independent research groups. ...

View more: Excitonic insulators are created in moiré superlattices

Colourful nanotubes become flame-resistant

Colour control Chemically stable Artist impression of the coloured nanotubes. (Courtesy: R Zhang) “Structurally colouring” carbon nanotubes with an amorphous layer of titanium dioxide not only makes them easier on the eye, it also makes them flame-resistant. This is the finding of researchers from Tsinghua University in Beijing, China, ...

View more: Colourful nanotubes become flame-resistant

3D printed sensor lines up for space plasma detection

Artificial muscles offer a route to greener air conditioning, breakthroughs in semiconductor physics and hidden consciousness

Bipolar transistors go organic

A novel window into ‘smart’ glass

Champion semiconductor could replace silicon, say researchers

4D-printed material responds to environmental stimuli

Meta-atoms act like road signs for light waves

‘Optical plucking’ manoeuvres single gold atoms into chemical reactions

Polarization switch makes ultrafast photonic computer

New semiconductor laser delivers high power at a single frequency

Low-friction state makes moving micro-objects easier

Weyl loops link up